Brake Disc Machining
Base Part Number: 1102
Repair
NOTE: On-Vehicle Brake Lathe Training Videos
1. Vehicle preparation.
Click here to view a video version of this procedure.
2. Mounting the machine.
Click here to view a video version of this procedure.
3. Lateral runout adjustment.
Click here to view a video version of this procedure.
4. Making the cut.
Click here to view a video version of this procedure.
5. Cutting the opposite side.
Click here to view a video version of this procedure.
6. Lathe maintenance.
Click here to view a video version of this procedure.
Repair
NOTE: On-Vehicle Brake Disc Machining
NOTE: Do not use a bench lathe to machine the brake discs. Use an on-vehicle brake lathe only. Read the entire operating manual and/or view the video shipped with the lathe before installing, operating or repairing the lathe.
NOTE: Lateral runout and disc thickness variation measurements are not required because correct adjustment of the on-vehicle brake lathe will make sure that these dimensions are within specification.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.