Front Brake Flexible Hose - Vehicles With: SVT Performance Package — 2016 workshop reference 2837

206-03 Front Disc Brake 2016 Mustang

Removal and Installation Procedure revision date: 11/2/2015

Front Brake Flexible Hose - Vehicles With: SVT Performance Package

Removal

NOTICE: Make sure all openings are sealed.

NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.

NOTE: Removal steps in this procedure may contain installation details.

1. Remove the brake caliper flow bolt and disconnect the front brake flexible hose. Discard the washers. Torque : 35 lb.ft (48 Nm)

Front Brake Flexible Hose - Vehicles With: SVT Performance Package — original illustration 1, reference 2837Original colors & callouts · Select to enlarge

Step 2

1. Disconnect the brake tube fitting. Torque : 159 lb.in (18 Nm)

2. Remove the bolt and the front brake flexible hose. Torque : 18 lb.ft (25 Nm)

Source reference 2837

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.