Brake Master Cylinder
Base Part Number: 2A032
Removal
NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water.
NOTE: Removal steps in this procedure may contain installation details.
Vehicles with manual transmission
1. Remove the brake fluid reservoir cap.
2. Using a suitable suction device, syphon the brake fluid from the brake fluid reservoir.
Source reference 2898
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.