6 | — | Measure the pressure at the specified port using a suitable pressure gauge |
7 | — | Measure the time using a suitable stopwatch |
8 | — | Wait for the specified period of time |
9 | — | The specified task requires the specified minimum temperature |
10 | — | The specified task requires the specified maximum temperature not to be exceeded |
11 | — | The specified task requires the specified temperature range |
12 | — | The specified task requires the specified temperature |
13 | — | Measure and check for the specified value using a dial indicator gauge |
14 | — | Measure and check for the specified MAX value using a dial indicator gauge |
15 | — | Measure and check for the specified MIN value using a dial indicator gauge |
General equipment symbols
The general equipment symbols are used to show where to use which type of general equipment to carry out a procedure step.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.