Item | Part Number | Description |
|---|---|---|
1 | — | Apply the substance from the specified tube |
2 | — | Apply the substance from the specified cartridge |
3 | — | Apply the specified chemical with a brush |
4 | — | Apply the specified load to the specified component |
5 | — | Apply a bead with a specific diameter from the specified tube |
6 | — | Apply a bead with a specific diameter from the specified cartridge |
7 | — | Apply the specified chemical with a roller |
8 | — | Apply hot glue to the specified component |
9 | — | Apply the specified amount of fluid from the fluid can |
10 | — | Apply fluid from the fluid can |
11 | — | Clean the specified component with the specified material |
12 | — | Apply a broken bead from the specified tube |
13 | — | Apply the specified chemical from a spray can |
14 | — | Apply the specified lubricant to the specified component |
15 | — | Apply spot welds to the specified component |
16 | — | Apply a continuous weld to the specified component |
17 | — | Handle the fluid using a syringe |
18 | — | Extract the specified amount of fluid using a syringe |
Measurement symbols
The measurement symbols are used to show where to measure which type of measurement to carry out a procedure step.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.