8 | Shift fork pivot bolts (6 required) |
9 | OSS sensor bolt |
10 | OSS sensor |
11 | Shift rail detents (4 required) |
12 | Transmission case vent tube |
13 | Shift shaft stop pin |
14 | Magnet |
15 | Input shaft |
16 | Output shaft roller bearing |
17 | 5th gear synchronizer cone |
18 | 5th gear synchronizer ring |
19 | Countershaft assembly |
20 | 3rd/4th shift fork |
21 | 3rd/4th shift rail |
22 | Output shaft assembly |
23 | 5th/6th shift fork |
24 | 5th/6th shift rail |
25 | Center support bearing (output shaft) |
26 | Center support bearing (countershaft) |
27 | Center support |
28 | Spring |
29 | Dowels (2 required) |
30 | Spacers (2 required) |
31 | Interlock plate |
32 | Center support bolts (3 required) |
33 | Interlock plate bolts (2 required) |
34 | 2nd gear needle bearing |
35 | 2nd gear |
36 | 2nd gear synchronizer ring assembly |
37 | Shift shaft assembly |
38 | 1st/2nd gear synchronizer assembly |
39 | 1st/2nd shift fork |
40 | Roll pin |
41 | 1st/2nd shift rail |
42 | 1st gear synchronizer ring assembly |
43 | 1st/2nd gear synchronizer assembly snap ring |
44 | 1st gear needle bearing |
45 | 1st gear |
46 | Reverse gear needle bearing race |
47 | Reverse gear needle bearing |
48 | Reverse gear |
49 | Reverse gear synchronizer ring |
50 | Reverse gear synchronizer assembly |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.