Fuel Tank and Lines - Overview
The fuel system consists of the :
saddle-type fuel tank. quick connect fuel and vapor tube couplings. fuel tank filler pipe assembly, which cannot be modified in any way, that also contains a restrictor plate to permit only unleaded fuel to be pumped into the tank. has an Easy Fuel™ (capless) fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly. two Fuel Pump Control Modules (FPCM). fuel rail. fuel injectors. an in-line serviceable fuel filter Fuel Tank Pressure (FTP) sensor (part of the fuel vapor tube assembly). Electronic Returnless Fuel System (ERFS). Fuel Level Sensor Fuel Pump (FP) module containing:
Two electric Fuel Pumps which provide pressurized fuel to the fuel rail. The Fuel Level Sender A check valve which maintains system pressure after the pump is shut off. A pressure relief for overpressure protection in the event of restricted fluid flow.
The vehicle:
has a serviceable fuel level sender mounted on the fuel pump module. has a fuel tank filler pipe which contains a restrictor plate to permit only unleaded fuel to be pumped into the fuel tank. has an Easy Fuel (capless) fuel tank filler pipe assembly, which cannot be modified in any way. has a supplemental refueling adapter located in the luggage compartment. has fuel tubes (liquid and vapor) combined in a bundle along with the brake tubes mounted on the underside of the floorpan and covered with a protective cover shield. has quick connect and spring lock fuel tube couplings. has two Fuel Pump Control Modules (FPCM) that shut off fuel in the event of a collision.
Fuel Pump Shut-off Feature
NOTE: Refer to the Description and Operation, Intelligent Access with Push Button Start in Section 419-01A to review the procedures for achieving the various ignition states (ignition OFF, ignition in ACCESSORY, ignition ON and ignition START) on vehicles with this feature.
In the event of a moderate to severe collision, the vehicle is equipped with a Fuel Pump and Sender Shut-off Feature that is initiated by the event notification signal.
The event notification signal is a signal provided by the RCM to the FPDM. Signal communication between the RCM and the FPDM allows the PCM to shut-off the Fuel Pump.
Should the vehicle shut off after a collision due to this feature, the vehicle may be restarted by first turning the ignition to the OFF position and then turn the ignition to the ON position. In some instances the vehicle may not start the first time and may take one additional ignition cycle.
Copyright © 2016 Ford Motor Company
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.