Climate Control Housing - 3.7L Duratec (227kW/301PS) — 2016 workshop reference 3712

412-00 Climate Control System - General Information 2016 Mustang

Removal and Installation Procedure revision date: 03/4/2016

Climate Control Housing - 3.7L Duratec (227kW/301PS)

Base Part Number: 19B555

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Recover the refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information, General Procedures).

2. Remove the instrument panel. Refer to: Instrument Panel (501-12 Instrument Panel and Console, Removal and Installation).

3. NOTICE: Make sure that all openings are sealed.

Remove the nut and the Thermostatic Expansion Valve (TXV) bracket, and disconnect the A/C condenser outlet line and the evaporator outlet line. Torque : 133 lb.in (15 Nm)

Climate Control Housing - 3.7L Duratec (227kW/301PS) — original illustration 1, reference 3712Original colors & callouts · Select to enlarge

4. Drain the cooling system. Refer to: Cooling System Draining and Vacuum Filling (303-03B Engine Cooling - 3.7L Duratec (227kW/301PS), General Procedures).

5. Disconnect the heater core inlet and outlet hoses.

Source reference 3712

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.