Evaporator Outlet Line - 5.0L 32V Ti-VCT — 2016 workshop reference 3787

412-00 Climate Control System - General Information 2016 Mustang

Removal and Installation Procedure revision date: 01/21/2016

Evaporator Outlet Line - 5.0L 32V Ti-VCT

Removal

NOTE: Removal steps in this procedure may contain installation details.

1. Recover the refrigerant. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging (412-00 Climate Control System - General Information, General Procedures).

2. Disconnect the battery ground and positive cables. Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).

3. If equipped with a strut tower cross brace, detach the wiring harness retainer. Remove the nuts and the strut tower cross brace. Torque : 41 lb.ft (55 Nm)

Evaporator Outlet Line - 5.0L 32V Ti-VCT — original illustration 1, reference 3787Original colors & callouts · Select to enlarge

4. Remove the following items:

1. Refer to: Cowl Panel Grille (501-02 Front End Body Panels, Removal and Installation).

2. Refer to: Battery Tray (414-01 Battery, Mounting and Cables, Removal and Installation).

5. Remove the fasteners and the cowl extension. Torque : 26 lb.ft (35 Nm)

Source reference 3787

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.