Instrument Panel Cluster (IPC) - System Operation and Component Description

ECU S/W: xxxx-xx

Man Date: xxxxxx B&A Config Bytes xx xx xx xx xx xx xx xx xx xx

Displays the manufacturing information. Date in the format of YYMMDD. B&A configuration bytes

DTC: HIST CURR xxxxxx x x xxxxxx x x

Displays all of the Diagnostic Trouble Codes (DTCs) set (history and current Diagnostic Trouble Codes [DTCs]). An X in the HIST or CURR column means the DTC is active. Three Diagnostic Trouble Codes (DTCs) display on each screen. If more Diagnostic Trouble Codes (DTCs) are present, there will be additional screens listing them. If there are no Diagnostic Trouble Codes (DTCs) in history or current, the display will only be the title row.

Vehicle Speed: xxx.x km/h xxx.x MPH Tach: xxxx RPM

Displays the digital representation of the speedometer in mph and km/h. Displays the digital representation of the tachometer in rpm.

Inst Fuel1: xxxx FLPM: xxxx.xx

Displays the instant fuel level and filtered fuel level in percent. This is used for the fuel pump assembly input on a dual sender fuel tank configuration.

Inst Fuel2: xxxx FLPM: xxxx.xx

Displays the instant fuel level and filtered fuel level in percent. This is used for the fuel level sensor input on a dual sender fuel tank configuration.

DTE: Inst 01 Disp km xxx xxx xxx mi xxx xxx xxx

Displays the values used for calculating the DTE function.

RAFE RAFE_01 xxx.x xxx.x 1/100km xxx.x xxx.x MPG xxx.x xxx.x km/l

Displays the running average fuel economy. The values are derived from the DTE function.

State Val #ofVS Szero1: xxxx xxxx Off: xxxx xxxx On: xxxx xxxx

Displays the key ON initialization, key OFF reference, and zero speed reference fuel level values in fuel level for the fuel pump assembly input on a dual sender fuel tank configuration.