Yes | REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes) . |
|---|---|
No | GO to K4 |
K4 CHECK THE GWM (GATEWAY MODULE A) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, check the GWM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Are any Diagnostic Trouble Codes (DTCs) recorded?
Yes | REFER to: Communications Network (418-00 Module Communications Network) . |
|---|---|
No | GO to K5 |
K5 RECHECK THE PAM (PARKING ASSIST CONTROL MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs). Operate the system and test for normal operation. Check the PAM Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Is DTC U0155:00 still present?
Yes | GO to K6 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
K6 CHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0155 SET IN OTHER MODULES
Using a diagnostic scan tool, clear all Diagnostic Trouble Codes (DTCs). Ignition OFF. Ignition ON. Wait 10 seconds. Using a diagnostic scan tool, retrieve the Continuous Memory Diagnostic Trouble Codes (CMDTCs) from all modules.
Is DTC U0155 set in any other module?
Yes | GO to K7 |
|---|---|
No | GO to K8 |
K7 CHECK FOR CORRECT IPC (INSTRUMENT PANEL CLUSTER) OPERATION
Ignition OFF. Disconnect and inspect the IPC connector and related in - line connectors. Repair:
corrosion (install new connector or terminals – clean module pins) damaged or bent pins – install new terminals/pins pushed-out pins – install new pins as necessary
Reconnect the IPC connector and related in - line connectors. Make sure they seat and latch correctly. Operate the system and determine if the concern is still present.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.