Module Network Input Messages - FCIM

ACM configuration

ACM

Used to verify that the correct configuration and modules are installed.

ACM radio functions

ACM

Used to display the ACM radio functions such as seek, tune and AM/ FM stations on the FCDIM.

ACM volume and mode status

ACM

Used to display audio volume and mode status on the FCDIM.

Audio source status

ACM

Used to display the selected audio source on the FCDIM.

CD load/eject

ACM

Used to display the loaded or ejected CD status on the FCDIM.

Date and time

IPC

Used to display the current date and time on the FCDIM.

Display language selection

IPC

Used to display information on the FCDIM in the selected language.

Door ajar status

BCM

Used to determine the door ajar status for the accessory delay feature.

Ignition status

IPC

Used to indicate the ignition state (OFF, ACCESSORY, RUN, and START) required for FCDIM operating modes and fault reporting.

Illumination dimming level

BCM

Used to control the backlight intensity of the FCDIM based on the dimmer switch input.

Phone call data

APIM

Used to send phone call data to the FCDIM.

Radio broadcast band selection

ACM

Used to display the selected radio tuner band on the FCDIM.

Transport Mode

IPC

Used to disable the functionality of the FCDIM until taken out of transport mode.

Vehicle configuration/information

IPC

Used to send vehicle configuration information to the FCDIM.

Vehicle speed

PCM

Used to determine the appropriate temperature display update rate.

Audio source selection

ACM

Used to indicate the selected audio system source.

Day/night status

BCM

Used for day/night illumination status for the FCIM.

Ignition status

BCM

Used to indicate the ignition state (OFF, ACCESSORY, RUN, and START) required for FCIM operating modes and fault reporting.

Power mode

IPC

Used to disable the functionality of the FCIM due to the load shedding feature.

Vehicle configuration data

BCM

Used to verify vehicle configuration data such as the VIN and system module configuration.