Description | Action | |||
|---|---|---|---|---|
DTC | ||||
U2017:51 | Control Module Software #2: Not Programmed | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, General Procedures). | ||
U2017:52 | Control Module Software #2: Not Activated | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, General Procedures). | ||
U2017:54 | Control Module Software #2: Missing Calibration | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, General Procedures). | ||
U2100:00 | Initial Configuration Not Complete: No Sub Type Information | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, General Procedures). | ||
U2101:00 | Control Module Configuration Incompatible: No Sub Type Information | This DTC sets due to an incorrect or incomplete APIM programming/provisioning. Using a diagnostic scan tool, PERFORM the APIM programming procedure. REFER to: SYNC Module [APIM] Programming (415-00B Information and Entertainment System - General Information - Vehicles With: Touchscreen Display, General Procedures). | ||
U3000:04 | Control Module: System Internal Failure | CLEAR all Continuous Memory Diagnostic Trouble Codes (CMDTCs). WAIT at least 10 seconds. RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:04 is retrieved again, PERFORM the APIM Hardware Test. Click here to access Guided Routine (APIM). | ||
U3000:09 | Control Module: Component Failure | CLEAR all Continuous Memory Diagnostic Trouble Codes (CMDTCs). WAIT at least 10 seconds. RETRIEVE all Continuous Memory Diagnostic Trouble Codes (CMDTCs). If DTC U3000:09 is retrieved again, PERFORM the APIM Hardware Test. Click here to access Guided Routine (APIM). | ||
U3000:41 | Control Module: General Checksum Failure | CLEAR the Diagnostic Trouble Codes (DTCs). WAIT at least 10 seconds. REPEAT the APIM self-test. If DTC U3000:41 is retrieved again, PERFORM the APIM Hardware Test. Click here to access Guided Routine (APIM). | ||
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.