Is an observable symptom present?
Yes | GO to AN2 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
AN2 RECHECK FOR DTC (DIAGNOSTIC TROUBLE CODE) U0142:00
Ignition ON. Using a diagnostic scan tool, clear all Continuous Memory Diagnostic Trouble Codes (CMDTCs). Ignition OFF. Ignition ON. Wait at least 10 seconds. Using a diagnostic scan tool, retrieve all Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Is DTC U0142:00 set in the ACM, audio DSP module, or DACMC?
Yes | GO to AN3 |
|---|---|
No | The system is operating correctly at this time. The DTC may have been set due to high network traffic or an intermittent fault condition. |
AN3 CHECK THE BCMB (BODY CONTROL MODULE B) FOR DTC (DIAGNOSTIC TROUBLE CODE) U3003:62
Ignition ON. Using a diagnostic scan tool, clear all Continuous Memory Diagnostic Trouble Codes (CMDTCs). Ignition OFF. Ignition ON. Wait at least 10 seconds. Using a diagnostic scan tool, retrieve all Continuous Memory Diagnostic Trouble Codes (CMDTCs).
Is DTC U3003:62 set in the BCMB?
Yes | REFER to: Body Control Module B (BCMB) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). See U3003:62. |
|---|---|
No | GO to AN4 |
AN4 CHECK FOR BATTERY VOLTAGE OUT-OF-RANGE DIAGNOSTIC TROUBLE CODES (DTCS)
Using a diagnostic scan tool, perform the self-test for the following modules:
ACM audio DSP module DACMC
Are any low or high voltage Diagnostic Trouble Codes (DTCs) recorded in the ACM, audio DSP module, or , DACMC?
Yes | • For DTC U3003:16, GO to Pinpoint Test AW • For DTC U3003:17, GO to Pinpoint Test AX |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.