Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.
4-84 Powertrain DTC Charts and Descriptions
Diagnostic Trouble Code (DTC) Charts and Descriptions
P060C - Internal Control Module Main Processor Performance (Continued)
Diagnostic Aids: Verify the PCM is at the latest calibration level.
Application Key On Engine Off Key On Engine Running Continuous Memory
All GO to Pinpoint Test QE.
P060D - Internal Control Module Accelerator Pedal Position Performance
Description: This DTC sets when an error occurs in the PCM. This DTC sets when the PCM detects a concern identifying an
issue with an accelerator pedal position (APP) sensor signal or with processing the brake pedal sensor input.
Possible Causes: • Damaged PCM
Diagnostic Aids: Verify the PCM is at the latest calibration level.
Application Key On Engine Off Key On Engine Running Continuous Memory
All GO to Pinpoint Test QE.
P0610 - Control Module Vehicle Options Error
Description: This DTC sets when one or more of the PCM VID Block fields were configured incorrectly.
Possible Causes: • Module reprogramming
• Aftermarket performance products
• Damaged PCM
Diagnostic Aids: Reprogram or update the calibration. Check for other DTCs or drive symptoms for further action. Check for
aftermarket performance products before installing a new PCM. If it is necessary to install a new PCM, refer to Section 2, Flash Electrically Erasable Programmable Read Only Memory (EEPROM), Programming the VID Block for a replacement PCM.
Application Key On Engine Off Key On Engine Running Continuous Memory
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.
P061A - Internal Control Module Torque Performance
Description: This DTC sets when a calculation error occurs in the PCM.
Possible Causes:
Diagnostic Aids: Check for sensor and circuit related DTCs. Do not install a new electronic throttle body (ETB) for this DTC.
Application Key On Engine Off Key On Engine Running Continuous Memory
All GO to Pinpoint Test QE.
P061B - Internal Control Module Torque Calculation Performance
Description: This DTC sets when a calculation error occurs in the PCM.
Possible Causes:
Diagnostic Aids: Check for sensor and circuit related DTCs. Do not install a new electronic throttle body (ETB) for this DTC.
Application Key On Engine Off Key On Engine Running Continuous Memory
All GO to Pinpoint Test QE.
P061C - Internal Control Module Engine RPM Performance
Description: This DTC sets when an error occurs in the PCM.
Possible Causes: • CKP circuit open
• CKP circuit short
• CKP circuit intermittent
• CMP circuit open
• CMP circuit short
2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.