MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Powertrain Control-Emissions Diagnosis

EM: Emission Compliance EM: Introduction

Powertrain Control-Emissions Diagnosis

Ford gasoline diagnostic supplementReference 5,101 / 6,619HTML edition
← Chapter contentsProcedure contents

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

EM4 SYMPTOM CHECKS

• Check if any of the following symptoms are present:

◾ transmission concerns ◾ idle concerns ◾ driveability concerns ◾ exhaust smoke ◾ cooling system concerns

Are any of the symptoms present?

Yes

No

CARRY OUT the PCM Quick Test. RETURN to Section 3 , Symptom Charts for further direction.

REFER to the Exhaust Gas Analysis Chart at the beginning of this pinpoint test.

After any repair,

GO to EM26 .

GO to EM5 .

EM5 PRELIMINARY CHECKS

• Carry out the following checks:

◾ vacuum lines for leaks and blockages ◾ electrical connections ◾ correct scheduled maintenance ◾ Ford authorized emission controls and components installed on the vehicle ◾ intake air tube and air cleaner concerns such as obstructions, leaks, or a dirty air cleaner

element

Is a concern present?

Yes

No

REPAIR as necessary.

After any repair,

GO to EM26 .

GO to EM6 .

EM6 CARRY OUT THE PCM QUICK TEST

• Carry out the PCM Quick Test to access any PCM DTCs. For the procedure information, refer to Section 3 , Symptom Charts.

Is a concern present?

Yes

No

FOLLOW the Section 3 Quick Test direction.

After any repair,

GO to EM26 .

GO to EM7 .

Source reference 5101

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.