2.7L GTDI F-150

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

Reference Values 6-171

(Continued)

Inputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) VCT_EXH_ PID 0 0.18 35.37 42.87 DEG ACT1 VCT_EXH_ PID 0 0.12 35.25 43.18 DEG ACT2 VCT_EXH_ PID 0 -0.18 -0.12 0 DEG DIF1 VCT_EXH_ PID 0 -0.12 -0.06 -0.25 DEG DIF2 VCT_INT_ PID 0 0.1: -0.06 0 DEG ACT1 VCT_INT_ PID 0 0.25 0.18 0.18 DEG ACT2 VCT_INT_ PID 0 0 0 -0.12 DEG DIF1 VCT_INT_ PID 0 -0.31 0.18 0.18 DEG DIF2 VSS PID 0 0 48 km/h (30 MPH) 89 km/h (55 MPH) km/h / MPH WGATE_PRES Wastegate 97 (14.07) 97 (14.07) 39 (5.66) 49 (7.11) kPa (PSI) Vacuum Sensor WGATE_V Wastegate 4.24 4.24 1.91 2.33 VOLTS Vacuum Sensor WGATE_VAC_ PID 0 1 (0.15) 59.50 (8.63) 48.50 (7.03) kPa (PSI) INF

Original table alignment retained · Scroll horizontally if needed

Outputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) AEIS_ ACTION PID 0 0 0 0 NUMERIC VALUE AEIS_ POSS PID 0 0 0 0 NUMERIC VALUE CYL_1-6_ACCL PID (I) -1 TO +1 -1 TO +1 -1 TO +1 NUMERIC VALUE DIST_ PID 0 0 0 0 KM (MILES) AEIS ETC [TAC_PCT] PID 9.41 4.31 7.45 10.58 % EVAP020C PID NO NO NO NO YES/NO EVAPCP EVAPCP Valve 0 0 31.43 90.97 % EVAPCV CANV Valve 0/OFF 0/OFF 0/OFF 0/OFF %/ON-OFF EVAPSOAK PID NO NO NO NO YES/NO EVAPSTA PID NOT RUNNING NOT RUNNING NOT RUNNING NOT RUNNING STATUS FP Fuel Pump 75/OFF 20.97/ON 20.30/ON 21.82/ON %/ON/OFF Control Module FUELSYS PID OPEN LOOP CLOSED LOOP CLOSED LOOP CLOSED LOOP OPEN LOOP/ CLOSED LOOP

Original table alignment retained · Scroll horizontally if needed

2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015

Source reference 5525

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.