3.5L GTDI F-150

Vehicle applicability: This diagnostic supplement covers multiple Ford vehicles and engines. Follow the application named in the source below. Some references apply to vehicles other than Mustang.

Reference Values 6-175

(Continued)

Inputs Component/PID Measured/PID Values Units Only Measured/PID KOEO Hot Idle 48 KM/H (30 89 KM/H (55 MPH) MPH) FTP FTP Sensor 2.63/0 2.66/0 2.63/0 2.37/-0.06 VOLTS/PSI FTP_H20 FTP Sensor 0.103 0.275 0.103 -1.689 in-H O 2 HTRCM12 HO2S12 Sensor 0 609 854 854 A/mA IAT IAT Sensor 1.61/53 (127.4) 3.35/17 (62.6) 3.71/10 (51.8) 3.69/10 (51.8) VOLTS/DEG C (DEG F) INJPWR_M PID 0 0 0 0 VOLTS LOAD PID (I) 33.33 32.94 56.86 % MAP MAP Sensor 1.99/99.97 0.98/42.95 (6.23) 1.48/72.46 1.94/97.97 VOLTS/kPa (PSI) (14.50) (10.51) (14.21) MIL_DIS PID 0 0 0 0 Miles MISFIRE PID NO NO NO NO YES/NO MP_LRN PID YES YES YES YES YES/NO O2S11_CUR HO2S11 Sensor (I) switching (C) switching (C) switching (C) uA O2S11_ HO2S11 Sensor 4.93 1 1 1 VOLTS IMPED O2S12 HO2S12 Sensor (I) (D) (D) (D) VOLTS O2S21_ HO2S21 Sensor 4.93 1 1 1 VOLTS IMPED RPM CKP Sensor 0 653 1260 1357 RPM SYNC PID NO YES YES YES YES/NO TCBP TCBP Sensor 99.3/14.41 99.5/14.44 100.2/14.54 115.6/16.77 kPa/PSI TCBP_V TCBP Sensor 1.56 1.56 1.56 1.79 VOLTS TP1 ETBTPS 4.08 4.29 4.19 4.11 VOLTS TP2 ETBTPS 1.24 0.82 1.03 1.17 VOLTS VCT_EXH_ PID 0 -0.06 48.25 41.93 DEG ACT1 VCT_EXH_ PID 0 0.06 46.00 42.06 DEG ACT2 VCT_EXH_ PID 0 -0.18 -0.06 0.43 DEG DIF1 VCT_EXH_ PID 0 0 0.06 1.43 DEG DIF2 VCT_INT_ PID 0 0.18 -0.56 -0.81 DEG ACT1 VCT_INT_ PID 0 -0.12 0.25 0.31 DEG ACT2 VCT_INT_ PID 0 -0.12 0.37 0.68 DEG DIF1 VCT_INT_ PID 0 0 -0.25 -0.37 DEG DIF2 VSS PID 0 0 48 km/h (30 MPH) 89 km/h (55 MPH) km/h / MPH

Original table alignment retained · Scroll horizontally if needed

2016 Powertrain Control/Emissions Diagnosis, Gasoline Engines, 3/2015

Source reference 5529

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.