MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Lighting

Autolamps

417-01 Exterior Lighting

2016 MustangReference 5,602 / 6,619HTML edition
← Chapter contentsProcedure contents

Is the voltage approximately 5 volts?

Yes

INSTALL a new autolamp and rain sensor or sunload sensor. REFER to: Light Sensor (417-01 Exterior Lighting, Removal and Installation).

No

GO to B8

B8 CHECK THE LIGHT SENSOR GROUND CIRCUIT FOR AN OPEN

Ignition OFF. Disconnect: BCM C2280B. Measure:

Click to display connectors

Vehicles With EMTC

Positive Lead

Measurement / Action

Negative Lead

C287-4

C2280B-22

Click to display connectors

Vehicles With DATC

Positive Lead

Measurement / Action

Negative Lead

C286-4

C2280B-22

Is the resistance less than 3 ohms?

Yes

GO to B11

No

REPAIR the circuit.

B9 CHECK THE LIGHT SENSOR INPUT CIRCUIT FOR A SHORT TO VOLTAGE

Disconnect: BCM C2280B.

Source reference 5602

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.