Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C205-10 | Ground | |
C205-11 | Ground | |
C205-12 | Ground | |
C205-13 | Ground |
Is any voltage present?
Yes | REPAIR the circuit in question. | |
|---|---|---|
No | GO to E9 | |
E7 CHECK THE HEADLAMP RELAY
Ignition OFF. Place the headlamp switch in the OFF position. Disconnect: LH Headlamp Relay or RH Headlamp Relay. Ignition ON.
Does the headlamp remain illuminated?
Yes | REPAIR the low beam voltage supply circuit between the headlamp relay and the headlamp assembly for a short to voltage. | |
|---|---|---|
No | GO to E8 | |
E8 CHECK THE LOW BEAM BCM (BODY CONTROL MODULE) CIRCUIT FOR A SHORT TO VOLTAGE
Ignition OFF. Disconnect: BCM C2280G. Ignition ON. Measure:
Click to display connectors
LH Headlamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
LH Headlamp Relay Socket Pin 1 | Ground |
Click to display connectors
RH Headlamp
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
RH Headlamp Relay Socket Pin 1 | Ground |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.