DTC Fault Trigger Conditions
Description | Fault Trigger Conditions | |||
|---|---|---|---|---|
DTC | ||||
B10F3:11 | Left Front Position Light: Circuit Short to Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH front parking lamp output circuit. | ||
B10F3:15 Left Front Position Light: Circuit Short to Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open from the LH front parking lamp output circuit. | |||
B10F4:11 | Right Front Position Light: Circuit Short to Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the RH front parking lamp output circuit. | ||
B10F4:15 Right Front Position Light: Circuit Short to Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open from the RH front parking lamp output circuit. | |||
B1445:11 | Rear Park Lamps Output: Circuit Short to Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the rear side marker and license plate lamp output circuit. | ||
B1445:15 | Rear Park Lamps Output: Circuit Short to Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open from the rear side marker and license plate lamp circuit. | ||
B1446:11 | Front Park Lamps Output: Circuit Short To Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the front sidemarker lamp output circuit. | ||
B1446:15 | Front Park Lamps Output: Circuit Short To Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open from the front sidemarker lamp output circuit. | ||
B149E:11 | Left Front Position/Sidemarker: Circuit Short To Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the LH front parking lamp output circuit. | ||
B149E:15 Left Front | Position/Sidemarker: Circuit Short To Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open from the LH front parking lamp output circuit. | ||
B149F:11 | Right Front Position/Sidemarker: Circuit Short To Ground | A continuous memory and on-demand DTC that sets when the BCM detects a short to ground from the RH front parking lamp output circuit. | ||
B149F:15 Right Front Position/Sidemarker: Circuit Short To Battery or Open | A continuous memory and on-demand DTC that sets when the BCM detects an open from the RH front parking lamp output circuit. | |||
U1000:00 | Solid State Driver Protection Active -Driver Disabled: No Sub Type Information | This DTC sets when the BCM has temporarily shut down the output driver. The module has temporarily disabled an output because an excessive current draw exists (such as a short to ground). The BCM cannot enable the output until the cause of the short is corrected, the Diagnostic Trouble Codes (DTCs) have been cleared and a successful self-test is run. | ||
U3000:49 | Control Module: Internal Electronic Failure | This DTC sets when the BCM has permanently shut down the output driver. The module has permanently disabled an output because an excessive current draw fault (such as a short to ground) has exceeded the limits that the BCM can withstand. CORRECT the cause of the excessive current draw before installing a new BCM. | ||
Possible Sources
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.