Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4368B-11 | C4368A-24 | |
C4368B-12 | C4368A-24 | |
C4368B-13 | C4368A-24 |
For scuff plate trim panel Light Emitting Diodes (LEDs), measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C4368B-9 | C4368A-24 | |
C4368B-10 | C4368A-24 | |
C4368B-23 | C4368A-24 |
Does the meter indicate the circuit is good?
Yes | GO to I3 |
|---|---|
No | REPAIR the LED voltage supply circuit in question. |
I3 CHECK FOR CORRECT BODY CONTROL MODULE B (BCMB) OPERATION
Disconnect and inspect all Body Control Module B (BCMB) connectors. Repair:
corrosion (install new connector or terminals – clean module pins) damaged or bent pins – install new terminals/pins pushed-out pins – install new pins as necessary
Reconnect the Body Control Module B (BCMB) connectors. Make sure they seat and latch correctly. Operate the system and determine if the concern is still present.
Is the concern still present?
Yes | CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If a TSB exists for this concern, DISCONTINUE this test and FOLLOW TSB instructions. If no Technical Service Bulletins (TSBs) address this concern, INSTALL a new Body Control Module B (BCMB). REFER to: Body Control Module B (BCMB) (419-10 Multifunction Electronic Modules, Removal and Installation). |
|---|---|
No | The system is operating correctly at this time. The concern may have been caused by module connections. ADDRESS the root cause of any connector or pin issues. CLEAR the Diagnostic Trouble Codes (DTCs). |
An Individual Ambient Lighting LED Is Inoperative/Does Not Cycle Through All Color Combinations
Refer to Wiring Diagrams Cell 89 for schematic and connector information.
Normal Operation and Fault Conditions
REFER to: Interior Lighting - System Operation and Component Description (417-02 Interior Lighting, Description and Operation).
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.