Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C341A-1 | Ground |
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C341B-1 | Ground |
Are the voltages greater than 11 volts?
Yes | GO to S2 |
|---|---|
No | VERIFY the BJB fuse 12 (30A) or BCM fuse 2 (7.5A) is OK. If OK, REPAIR the circuit. If not OK, REFER to the Wiring Diagrams manual to identify the possible causes of the circuit short. |
S2 CHECK THE DSM (DRIVER FRONT SEAT MODULE) GROUND CIRCUIT FOR AN OPEN
Ignition OFF. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C341A-2 | Ground |
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C341B-24 | Ground |
Is the resistance less than 3 ohms?
Yes | GO to S3 |
|---|---|
No | REPAIR the circuit. |
S3 CHECK THE MS-CAN (MEDIUM SPEED-CONTROLLER AREA NETWORK) CIRCUITS BETWEEN THE DSM (DRIVER FRONT SEAT MODULE) AND THE GWM (GATEWAY MODULE A) FOR AN OPEN
Disconnect DSM C341D. Disconnect GWM C2431. Measure:
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.