Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1463A-1 | Ground |
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1463B-2 | Ground |
Is the voltage greater than 11 volts?
Yes | GO to R2 |
|---|---|
No | VERIFY the high current BJB MEGA fuse 1 (125A) or BJB fuse 64 (5A) is OK. If OK, REPAIR the circuit. If not OK, REFER to the Wiring Diagrams manual to identify the possible causes of the circuit short. |
R2 CHECK THE PSCM (POWER STEERING CONTROL MODULE) GROUND CIRCUIT FOR AN OPEN
Ignition OFF. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1463B-1 | Ground |
Is the resistance less than 3 ohms?
Yes | GO to R3 |
|---|---|
No | REPAIR the circuit. |
R3 CHECK THE HS-CAN2 (HIGH SPEED-CONTROLLER AREA NETWORK 2) CIRCUITS BETWEEN THE PSCM (POWER STEERING CONTROL MODULE) AND THE DLC (DATA LINK CONNECTOR) FOR AN OPEN
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1463A-2 | C251-3 | |
C1463A-3 | C251-11 |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.