MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Engine

Cooling System Draining and Vacuum Filling

303-01C Engine Cooling - 5.0L

2016 Mustang5.0LReference 592 / 6,619HTML edition
← Chapter contents

303-03C Engine Cooling - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 2016 Mustang (308kW/418PS)

Procedure revision date:

General Procedures

01/19/2016

Cooling System Draining and Vacuum Filling

Special Tool(s) / General Equipment

303-01C Engine Cooling - 5.0L — original illustration 1, reference 592Original colors & callouts · Select to enlarge

ROB75240 Coolant/Battery Refractometer (Fahrenheit)

Fluid Container

Cooling System Vacuum Tester and Refiller

Materials

Name

Specification

Motorcraft® Orange Antifreeze/Coolant Prediluted (U.S.) VC-3DIL-B (U.S.)

WSS-M97B44-D2

Motorcraft® Orange Antifreeze/Coolant Concentrated (U.S.) VC-3-B (U.S.)

WSS-M97B44-D

Draining

NOTICE: The coolant must be recovered in a suitable, clean container for reuse. If the coolant is contaminated, it must be recycled or disposed of correctly. Using contaminated coolant may result in damage to the engine or cooling system components.

NOTICE: The vehicle cooling system is filled with Motorcraft® Orange Antifreeze/Coolant. Do not mix coolant types. Mixing coolant types degrades the corrosion protection of the coolant. Failure to follow these instructions may damage the engine or cooling system.

NOTICE: Always fill the cooling system with the manufacturer's specified coolant. Chemically flush the cooling system if a non-specified coolant has been used. Refer to Cooling System Flushing. Failure to follow these instructions may damage the engine or cooling system.

NOTE: During normal vehicle operation, Motorcraft® Orange Antifreeze/Coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate the engine coolant has degraded nor does it require the engine coolant to be drained, the system to be flushed, or the engine coolant to be replaced.

NOTE: Less than 80% of coolant capacity can be recovered with the engine in the vehicle. Dirty, rusty or contaminated coolant requires replacement.

303-01C Engine Cooling - 5.0L — original illustration 2, reference 592Original colors & callouts · Select to enlarge

1.

303-01C Engine Cooling - 5.0L — original illustration 3, reference 592Original colors & callouts · Select to enlarge

WARNING: When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.

Remove the pressure relief cap.

Source reference 592

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.