Module Configuration - System Operation and Component Description — 2016 workshop reference 5976

is downloaded and stored in the As-Built database. As-Built data does not reflect customer preference items that have been changed from the default state. These items need to be changed using programmable parameters after the module is configured.

It is not necessary to obtain As-Built data unless directed to do so by the diagnostic scan tool. This data may be accessed from the technician service publication web site.

Module Configuration and Parameter Chart

The chart describes specific module configuration information:

Module Name	Module Address	Programmable Module Installation (PMI) Available	Reprogram/Flash Capable	Requires Adaptive Learning or Calibration	Available Progammable Parameters
APIM (without touchscreen)	7D0	Yes	Yes	No	None
APIM (with touchscreen)	7D0	Yes	Yes	No	Tire size Travel Link
ABS module	760	Yes	Yes	IVD initialization	Line Lock feature enabled
ACM	727	Yes	Yes	No	None
BCM	726	Yes	Yes	Ambient lighting calibration Rear view camera calibration	Auto unlock enable/disable Trim switch inhibit enable/disable DRL configuration Remote start enable Remote start lighting enable TracKey configuration
BCMB	7B7	Yes	Yes	No	Entry lighting Blue Red Green
CCM	764	Yes	Yes	Radar horizontal and vertical alignment calibration	None
DSP	783	Yes	Yes	No	None
DACMC (integrated with ACM)	7D5	Yes	Yes	No	None
DDM	740	Yes	Yes	Windows initialization	None
DSM	744	Yes	Yes	No	None
SCME	776	Yes	Yes	No	None

Source reference 5976

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.