Perimeter Anti-Theft Alarm
BCM DTC Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
BCM DTC Chart
Description | Action | |||
|---|---|---|---|---|
DTC | ||||
B109F:01 | Intrusion Sensor Module: General Electrical Failure | GO to Pinpoint Test B | ||
B109F:02 | Intrusion Sensor Module: General Signal Failure | GO to Pinpoint Test B | ||
B109F:08 | Intrusion Sensor Module: Bus Signal / Message Failure | GO to Pinpoint Test B | ||
B109F:49 | Intrusion Sensor Module: Internal Electronic Failure | INSTALL a new intrusion sensor. | ||
B109F:55 | Intrusion Sensor Module: Not Configured | Using a diagnostic scan tool, CARRY OUT the LIN New Module Initialization procedure (Toolbox>Electrical>Service Functions>LIN New Module Initialization). | ||
B109F:97 | Intrusion Sensor Module: Component or System Operation Obstructed or Blocked | GO to Pinpoint Test B | ||
B109F:9A | Intrusion Sensor Module: Component or System Operating Conditions | GO to Pinpoint Test B | ||
B1305:01 | Hood Switch: General Electrical Failure | GO to Pinpoint Test F | ||
All other Diagnostic Trouble Codes (DTCs) | - | REFER to: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). | ||
Symptom Chart
Symptom Chart: Anti-Theft - Perimeter
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Symptom Chart
Original table alignment retained · Scroll horizontally if needed
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.