Cruise Control Switch | PID Value |
|---|---|
Resume (pressed/released) | On/Off |
Cancel (pressed/released) | On/Off |
SET + (pressed/released) | On/Off |
SET - (pressed/released) | On/Off |
Does the PID value agree with the switch position?
Yes | For automatic transmission, GO to A6 For manual transmission, GO to A12 |
|---|---|
No | If only one switch does not display the correct PID value, INSTALL a new LH steering wheel switch. REFER to: Steering Wheel Multifunction Switch (211-05 Steering Wheel and Column Electrical Components, Removal and Installation). If multiple switches do not display the correct PID value, GO to A7 |
A6 MONITOR THE PCM (POWERTRAIN CONTROL MODULE) TR (TRANSMISSION RANGE) PID (PARAMETER IDENTIFICATION)
Using a diagnostic scan tool, view PCM Parameter Identifications (PIDs). Monitor the PCM PID TR. Select DRIVE.
Does the PID value agree with the TR selector lever position?
Yes | GO to A12 |
|---|---|
No | REFER to: External Controls (307-05 Automatic Transmission External Controls, Diagnosis and Testing). |
A7 CHECK FOR VOLTAGE TO THE CRUISE CONTROL SWITCHES
Ignition OFF. Remove the driver airbag. REFER to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation). Disconnect LH Steering Wheel Switch C2366. Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2366-4 | C2366-5 | |
C2366-6 | C2366-5 | |
C2366-7 | C2366-5 |
Is the voltage approximately 5 volts?
Yes TURN the ignition off and WAIT one minute. INSTALL a new LH steering wheel switch.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.