Cruise Control — 2016 workshop reference 6049

REFER to: Steering Wheel Multifunction Switch (211-05 Steering Wheel and Column Electrical Components, Removal and Installation).

INSTALL the driver airbag. REFER to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation).

No	GO to A8

A8 CHECK THE STEERING WHEEL SWITCH HARNESS FOR AN OPEN

Ignition OFF. Disconnect Clockspring C218B. Measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C2366-4		C218B-15
C2366-5		C218B-8
C2366-6		C218B-6
C2366-7		C218B-7

Are the resistances less than 3 ohms?

Yes	GO to A9
No	Install a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation).

A9 CHECK THE STEERING WHEEL SWITCH HARNESS FOR A SHORT TO GROUND

Measure:

Click to display connectors

Positive Lead	Measurement / Action	Negative Lead
C2366-4		Ground
C2366-5		Ground
C2366-6		Ground
C2366-7		Ground

Are the resistances greater than 10,000 ohms?

Yes	GO to A10
No	Install a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation).

A10 CHECK THE STEERING WHEEL SWITCH CIRCUITS THROUGH THE CLOCKSPRING FOR AN OPEN

Source reference 6049

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.