Yes | TURN the ignition off and WAIT one minute. INSTALL a new LH steering wheel switch. REFER to: Steering Wheel Multifunction Switch (211-05 Steering Wheel and Column Electrical Components, Removal and Installation). INSTALL the driver airbag. REFER to: Driver Airbag (501-20B Supplemental Restraint System, Removal and Installation). |
|---|---|
No | GO to A9 |
A9 CHECK THE STEERING WHEEL SWITCH HARNESS FOR AN OPEN
Ignition OFF. Disconnect Clockspring C218B. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2366-4 | C218B-15 | |
C2366-5 | C218B-8 | |
C2366-6 | C218B-6 | |
C2366-7 | C218B-7 |
Are the resistances less than 3 ohms?
Yes | GO to A10 |
|---|---|
No | Install a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation). |
A10 CHECK THE STEERING WHEEL SWITCH HARNESS FOR A SHORT TO GROUND
Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2366-4 | Ground | |
C2366-5 | Ground | |
C2366-6 | Ground | |
C2366-7 | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to A11 |
|---|---|
No | Install a new steering wheel. REFER to: Steering Wheel (211-04 Steering Column, Removal and Installation). |
A11 CHECK THE STEERING WHEEL SWITCH CIRCUITS THROUGH THE CLOCKSPRING FOR AN OPEN
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.