MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Electronic Feature Group

Blind Spot Information System

419-04 Side and Rear Vision

2016 MustangReference 6,165 / 6,619HTML edition
← Chapter contentsProcedure contents

Ignition OFF. Ignition ON. Using a diagnostic scan tool, perform the network test.

Do the SODL and SODR pass the network test?

Yes

GO to B4

No

REFER to: Communications Network (418-00 Module Communications Network) .

B4 CHECK THE SODL (SIDE OBSTACLE DETECTION CONTROL MODULE LH) AND SODR (SIDE OBSTACLE DETECTION CONTROL MODULE RH) DIAGNOSTIC TROUBLE CODES (DTCS)

Using a diagnostic scan tool, retrieve all Diagnostic Trouble Codes (DTCs) from the SODL and SODR.

Are any Diagnostic Trouble Codes (DTCs) present?

B5 VERIFY THE MESSAGE CENTER FUNCTIONALITY

Verify the message center functions correctly.

Does the message center function correctly?

Yes

GO to B6

No

REFER to: Instrumentation, Message Center and Warning Chimes (413-01 Instrumentation, Message Center and Warning Chimes) .

B6 VERIFY THE CROSS TRAFFIC ALERT (CTA) IS ENABLED IN THE MESSAGE CENTER

NOTE: Verify a MyKey® is NOT in use.

Navigate to the Cross Traffic Alert (CTA) menu in the message center and verify the Cross Traffic Alert (CTA) system is ON.

Is the Cross Traffic Alert (CTA) system ON?

Yes

GO to B7

No

ACTIVATE the Cross Traffic Alert (CTA) system. If the system cannot be activated, GO to B8

B7 CHECK FOR CORRECT GEAR INPUT

Apply the parking brake. While monitoring the reversing lamps, move the selector lever (automatic transmission) or gearshift lever (manual transmission) through the entire range.

Do the reversing lamps illuminate only in reverse?

Yes

GO to B8

Source reference 6165

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.