Camshaft Position (CMP) Sensor
Base Part Number: 12K073
Materials
Name | Specification |
|---|---|
Motorcraft® SAE 5W-20 Full Synthetic Motor Oil (U.S.) XO-5W20-QFS (U.S.) | WSS-M2C945-A |
Removal
NOTE: Removal steps in this procedure may contain installation details.
All sensors
1. Remove the intake manifold. Refer to: Intake Manifold (303-01C Engine - 5.0L 32V Ti-VCT/5.0L Ti-VCT V8 (308kW/418PS), Removal and Installation).
RH (right-hand) Camshaft Position (CMP) Sensors
Step 2
1. Disconnect the intake CMP sensor electrical connector and remove the retainer and the CMP sensor. Material : Motorcraft® SAE 5W-20 Full Synthetic Motor Oil (U.S.) / XO-5W20-QFS (U.S.) (WSS-M2C945-A) Torque : 89 lb.in (10 Nm)
2. Disconnect the exhaust CMP sensor electrical connector and remove the retainer and the CMP sensor. Material : Motorcraft® SAE 5W-20 Full Synthetic Motor Oil (U.S.) / XO-5W20-QFS (U.S.) (WSS-M2C945-A) Torque : 89 lb.in (10 Nm)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.