Rear View Mirrors — 2016 workshop reference 907

window control switch, INSTALL a new DDM. REFER to: Driver Door Module (DDM) (419-10 Multifunction Electronic Modules, Removal and Installation). If all power window do not operate normally from the LH front door window control switch, DIAGNOSE the power windows before continuing diagnostics of the exterior mirrors. REFER to: Glass, Frames and Mechanisms (501-11 Glass, Frames and Mechanisms, Diagnosis and Testing).

The LH exterior mirror is inoperative (with memory mirrors)	Refer to the Pinpoint Test	GO to Pinpoint Test C
The LH exterior mirror does not operate correctly in all directions (with memory mirrors)	Refer to the Pinpoint Test	GO to Pinpoint Test C
The RH exterior mirror is inoperative (with memory mirrors)	Refer to the Pinpoint Test	GO to Pinpoint Test D
The RH exterior mirror does not operate correctly in all directions (with memory mirrors)	Refer to the Pinpoint Test	GO to Pinpoint Test D
The LH or RH heated exterior mirror is inoperative or always on (with memory mirrors)	Refer to the Pinpoint Test	GO to Pinpoint Test E
One or both heated exterior mirrors are inoperative (without memory mirrors)	Refer to the Pinpoint Test	GO to Pinpoint Test F
Both heated exterior mirrors are always on (without memory mirrors)	Refer to the Pinpoint Test	DIAGNOSE the rear window defrost system. REFER to: Glass, Frames and Mechanisms (501-11 Glass, Frames and Mechanisms, Diagnosis and Testing).
The LH and RH heated exterior mirrors do not defrost at the same rate	Normal operation of the heated exterior mirror	No action required, the system is operating correctly at this time.
The LH and/or RH power folding mirror is inoperative/does not operate correctly (if equipped)	Refer to the Pinpoint Test	GO to Pinpoint Test G
The RH and LH power folding mirror do not fold and/or unfold at the same rate of speed (if equipped)	Normal operation of the power folding mirror	No action required, the system is operating correctly at this time.
The projector lamp is inoperative or always on	Wiring, terminals or connectors Projector lamp BCM	REFER to: Interior Lighting (417-02 Interior Lighting, Diagnosis and Testing).

Source reference 907

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.