DTC | Description | Action |
|---|---|---|
B272B Passenger Back Over-Temp Detected | GO to Pinpoint Test AA | |
B272C Driver Differential Temperature Fault | GO to Pinpoint Test AB | |
B272D Passenger Differential Temperature Fault | GO to Pinpoint Test AC | |
B272E Driver Ignition Run/Blower Circuit Short to Ground | GO to Pinpoint Test AD | |
B272F | Passenger Ignition Run/Blower Circuit Short to Ground | GO to Pinpoint Test AE |
B2730 | Back Over-Temp Detected | GO to Pinpoint Test AG |
U2050 | No Application Present | INSTALL a new SCME. REFER to: Front Seat Climate Control Module [SCME] (501-10A Front Seats, Removal and Installation). |
DTC Chart: DSM
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
DSM DTC Chart
DTC | Description | Action |
|---|---|---|
B1317 Battery Voltage High | GO to Pinpoint Test G | |
B1318 Battery Voltage Low | GO to Pinpoint Test H | |
B1663 Seat Driver Front Up/Down Motor Stalled | If the motor does not operate, GO to Pinpoint Test C If the motor operates in one second intervals, GO to Pinpoint Test D | |
B1664 Seat Driver Rear Up/Down Motor Stalled | If the motor does not operate, GO to Pinpoint Test C If the motor operates in one second intervals, GO to Pinpoint Test D | |
B1665 Seat Driver Forward/Backward Motor Stalled | If the motor does not operate, GO to Pinpoint Test C If the motor operates in one second intervals, GO to Pinpoint Test D | |
B1711 | Seat Driver Front Up Switch Circuit Short To Battery | GO to Pinpoint Test C |
B1715 Seat Driver Front Down Switch Circuit Short To Battery | GO to Pinpoint Test C | |
B1719 Seat Driver Forward Switch Circuit Short To Battery | GO to Pinpoint Test C | |
B1723 Seat Driver Rearward Switch Circuit Short To Battery | GO to Pinpoint Test C | |
B1727 Seat Driver Rear Up Switch Circuit Short To Battery | GO to Pinpoint Test C | |
B1731 Seat Driver Rear Down Switch Circuit Short To Battery | GO to Pinpoint Test C | |
B1952 Seat Rear Up/Down Position Feedback Circuit Short To Battery | GO to Pinpoint Test D | |
B1953 Seat Rear Up/Down Position Feedback Circuit Short To Ground | GO to Pinpoint Test D | |
B1956 Seat Front Up/Down Position Feedback Circuit Short To Battery | GO to Pinpoint Test D | |
B1957 Seat Front Up/Down Position Feedback Circuit Short To Ground | GO to Pinpoint Test D | |
B1964 Seat Horizontal Forward/Rearward Position Feedback Circuit Short To Battery | GO to Pinpoint Test D | |
B1965 Seat Horizontal Forward/Rearward Position Feedback Circuit Short To Ground | GO to Pinpoint Test D | |
B2477 Module Configuration Failure | NOTE: This DTC indicates PMI has not been carried out on a newly installed module or configuration data has been lost. Presence of this DTC alone does not prevent basic seat operation from the seat control switch. Using a diagnostic scan tool, CARRY OUT PMI on the DSM. REPEAT the self-test and VERIFY successful PMI. CLEAR the Diagnostic Trouble Codes (DTCs). | |
U0140 Lost Communication With Body Control Module (GEM) | GO to Pinpoint Test I | |
U2050 No Application Present | INSTALL a new DSM. REFER to: Driver Front Seat Module (DSM) (501-10A Front Seats, Removal and Installation). |
Symptom Chart(s)
Symptom Chart: Front Seats
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.