MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2015–2017 source collection · Additional coverage

Engine Cooling — Pinpoint Tests — Pinpoint Test B : Pinpoint Test

Engine Cooling - 2.3L EcoBoost (231kW & 314PS)

Source configuration appliesSource reference 5,853HTML edition
← Chapter contentsManual collection

Remove the oil level indicator from the engine.

Is coolant evident in the oil?

No

GO to B8

NOTE: Use UView® Combustion Leak Tester part number UVU560000-R or equivalent.

Using a cooling system combustion gas leak tester, following the instructions supplied with the tester, check the coolant for combustion gases.

B8 CHECK THE COOLING SYSTEM FOR COMBUSTION GASES

Are combustion gases present?

No

GO to B9

B9 CHECK COOLANT CONDITION

Check the coolant for dirt, rust or contamination and check the coolant concentration.

Is the coolant condition OK?

Yes

GO to B10

No

FLUSH the engine cooling system. REFER to: Cooling System Flushing .

B10 CHECK THE ELECTRIC COOLING FAN OPERATION

Start the engine.

Place the climate control function selector in the MAX A/C position and the blower motor switch in the HI position.

Did the electric cooling fan operate?

Yes

GO to B11

No

DIAGNOSE the electric cooling fan operation. Refer to ENGINE CONTROLS - SYMPTOM CHARTS (EXCEPT DIESEL & HYBRID) .

Ford_Mustang_all_2015-2017.pdf · source reference 5853

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.