2015–2017 source collection · Additional coverage

Starting System — Pinpoint Test(S) — Pinpoint Test A : Engine Does Not Crank

Starting System - 3.7L Duratec (227kW & 301PS)

Source configuration appliesSource reference 6,284HTML edition

No	REPAIR the affected circuit.

A23 CHECK THE CPP (CLUTCH PEDAL POSITION) SWITCH OPERATION

Ignition OFF.

Disconnect PCM C1381B .

While fully applying the clutch pedal, measure:

Positive Lead	Measurement / Action	Negative Lead
C1381B-9		Ground

Is the resistance less than 3 ohms?

Yes	GO to A28

No	GO to A24

A24 CHECK THE CPP (CLUTCH PEDAL POSITION) GROUND CIRCUIT FOR AN OPEN

Disconnect CPP switch C2353 .

Measure:

Positive Lead	Measurement / Action	Negative Lead
C2353-2		Ground

Is the resistance less than 3 ohms?

Yes	GO to A25

No	REPAIR the circuit.

A25 CHECK THE CPP (CLUTCH PEDAL POSITION) SWITCH CIRCUIT FOR AN OPEN

Measure:

Positive Lead	Measurement / Action	Negative Lead
C1381B-9		C2353-1

Is the resistance less than 3 ohms?

Yes	INSTALL a new CPP switch. REFER to: CLUTCH PEDAL POSITION (CPP) SWITCH - 3.7L Duratec (227kW/301PS).

Ford_Mustang_all_2015-2017.pdf · source reference 6284

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.