SSD SIG, CBLR/C456 SUPPLY, CBLR SUPPLY hydraulic circuits blocked/leaking | DISASSEMBLE and INSPECT the main control valve body and separator plate passages for debris/blockage. CLEAN as necessary. REFER to: Main Control Valve Body . |
Low/Reverse clutch friction plates | DISASSEMBLE and INSPECT the low/reverse clutch friction and steel plates. INSTALL new components as necessary. REFER to: Transmission . |
Low/Reverse clutch piston return spring | INSPECT the return spring for proper installation and damage. INSTALL new components as necessary. REFER to: Transmission . |
DIAGNOSIS AND TESTING > LOW ONE-WAY CLUTCH ASSEMBLY
Low One Way Clutch
For low one way clutch operation, REFER to: Low One-Way Clutch Assembly .
NOTE: Do not clean with water or with water-based solvents. Damage to the component may occur.
NOTE: The low one way clutch cannot be disassembled.
Clean and inspect the low one way clutch for cracks and damaged splines. The splined section should rotate in the direction of the number 1 arrow and lock when rotated in the direction of the number 2 arrow. Check for burned or excessively worn surfaces. If any damage is found or the clutch does not rotate or lock, install a new low one-way clutch.
Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.