Torque Converter Clutch (Tcc) — Automatic Transmission - 6-Speed Automatic Transmission - 6R80 · Reference 8853

Move the slide until the VSS shows 5 Km/h (3 MPH), or the maximum speed attained.

9. Did the vehicle reach 5 Km/h (3 MPH) within 5 seconds?

Yes - vehicle is operating normally. This procedure does not apply.

No - replace the transmission pump assembly. REFER to: Transmission .

DIAGNOSIS AND TESTING > SPECIAL TESTING PROCEDURES > FRONT PUMP

OUTPUT TEST- TORQUE CONVERTER PRESSURE REGULATOR VALVE

1. Using a diagnostic scan tool, perform a self-test and check for DTCs.

2. RECORD the RPM and TSS data while raising the engine RPM.

3. If the TSS stays at 0 RPM the torque converter is malfunctioning.

4. INSPECT the main control torque converter regulator valve.

DIAGNOSIS AND TESTING > TORQUE CONVERTER CLUTCH (TCC)

For torque converter operation, REFER to: Torque Converter .

Condition Possible Sources Action TCC solenoid mechanically INSTALL a new TCC solenoid. stuck OFF REFER to: Shift Solenoids (SS) . DISASSEMBLE, CLEAN and INSPECT the regulator valve. If Bypass Clutch Control Regulator bore or valve is damaged, INSTALL Valve stuck OFF a new main control valve body. TCC does not apply REFER to: Main Control Valve Body . DISASSEMBLE, CLEAN and INSPECT the regulator valve. If Converter Release Regulator bore or valve is damaged, INSTALL Valve stuck OFF a new main control valve body.

Original table alignment retained · Scroll horizontally if needed

Ford_Mustang_all_2015-2017.pdf · source reference 8853

Original technical text and illustrations, formatted as HTML. Follow the engine, transmission, equipment, model and year specified in the source. Import and layout checks do not establish applicability to every 2015–2017 Mustang. About this collection.