MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Front Seats

501-10A Front Seats

2016 MustangReference 1,009 / 6,619HTML edition
← Chapter contentsProcedure contents

Are the resistances less than 3 ohms?

Yes

INSTALL a new driver seat control switch. REFER to: Front Seat Control Switch (501-10A Front Seats, Removal and Installation). GO to F10

No

REPAIR the circuit in question. GO to F10

F6 CHECK FOR VOLTAGE TO THE SEAT FRONT HEIGHT MOTOR

Disconnect: Driver Seat Front Height Motor C382.

NOTE: The voltage being measured changes polarity depending upon which direction the seat control switch is activated. While pushing the front height switch upward and downward, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C382-1

C382-3

Is the voltage greater than 11 volts when the seat control switch is operated in both directions?

Yes

INSTALL a new driver seat track. REFER to: Front Seat Track (501-10A Front Seats, Removal and Installation). GO to F10

No

GO to F7

F7 CHECK THE SEAT FRONT HEIGHT MOTOR CIRCUIT FOR AN OPEN

Disconnect: Driver Seat Control Switch C352. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C352-1

C382-3

C352-2

C382-1

Are the resistances less than 3 ohms?

Yes

INSTALL a new driver seat control switch. REFER to: Front Seat Control Switch (501-10A Front Seats, Removal and Installation). GO to F10

No

REPAIR the circuit in question. GO to F10

F8 CHECK FOR VOLTAGE TO THE SEAT REAR HEIGHT MOTOR

Disconnect: Driver Seat Rear Height Motor C363.

NOTE: The voltage being measured changes polarity depending upon which direction the seat control switch is activated. While pushing the rear height switch upward and downward, measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

C363-1

C363-3

Is the voltage greater than 11 volts when the seat control switch is operated in both directions?

Yes

INSTALL a new driver seat track. REFER to: Front Seat Track (501-10A Front Seats, Removal and Installation). GO to F10

No

GO to F9

F9 CHECK THE SEAT REAR HEIGHT MOTOR CIRCUIT FOR AN OPEN

Disconnect: Passenger Seat Control Switch C352. Measure:

Click to display connectors

Positive Lead

Measurement / Action

Negative Lead

Source reference 1009

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.