Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265A-G | Ground | |
C3265A-H | Ground | |
C3265A-J | Ground | |
C3265A-K | Ground |
Are the resistances greater than 10,000 ohms?
Yes | GO to L2 |
|---|---|
No | If the resistance of C3265A-G and C3265A-H to ground is not greater than 10,000 ohms to ground, GO to L6 If the resistance of C3265A-J and C3265A-K to ground is not greater than 10,000 ohms to ground, GO to L7 |
L2 CHECK BLOWER MOTOR CIRCUITS FOR A SHORT TO VOLTAGE
Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265A-G | Ground | |
C3265A-H | Ground | |
C3265A-J | Ground | |
C3265A-K | Ground |
Is any voltage present?
Yes | If voltage is present at C3265A-G and/or C3265A-H, GO to L8 If voltage is present at C3265A-J and/or C3265A-K, GO to L9 |
|---|---|
No | GO to L3 |
L3 CHECK THE RESISTANCE OF THE BLOWER MOTOR AND WIRING
Ignition OFF. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265A-G | C3265A-H | |
C3265A-J | C3265A-K |
Are the resistances between 0.9 and 10 ohms?
Yes | GO to L10 |
|---|---|
No | If the resistance between C3265A-G and C3265A-H is not between 0.9 and 10 ohms, GO to L5 If the resistance between C3265A-J and C3265A-K is not between 0.9 and 10 ohms, GO to L4 |
L4 CHECK BACKREST BLOWER MOTOR THERMO ELECTRIC DEVICE RESISTANCE
Disconnect: Driver Seat Backrest Blower Motor C3034. Measure the component side resistance between:
Positive Lead | Measurement / Action | Negative Lead |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.