Is the resistance between 240K and 400K ohms?
Yes | GO to Z15 |
|---|---|
No | INSTALL a new passenger seat cushion blower motor. REFER to: Front Seat Cushion Blower Motor (501-10A Front Seats, Removal and Installation). GO to Z22 |
Z15 CHECK THE PASSENGER SEAT CUSHION BLOWER MOTOR INSTALLATION AND FOR CRUSHED SEAT CUSHION
Ignition OFF. Remove the passenger seat. REFER to: Front Seat (501-10A Front Seats, Removal and Installation). Remove the passenger seat cushion cover. REFER to: Front Seat Cushion Cover (501-10A Front Seats, Removal and Installation). Inspect the passenger seat cushion for the following:
Blower motor correctly installed Cushion foam pad crushed or restricted
Is the passenger seat cushion blower motor correctly installed and are there no signs of damage to the foam pad?
Yes | INSTALL the passenger seat cushion cover and seat. GO to Z18 |
|---|---|
No | CORRECTLY install the passenger seat cushion blower motor or INSTALL a new passenger seat cushion foam pad. GO to Z22 |
Z16 CHECK THE PASSENGER SEAT CUSHION BLOWER MOTOR THERMISTOR AND WIRING
REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Disconnect: Passenger Side Airbag In-line C219. Disconnect: SCME C3265B. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265B-2 | C3265B-3 |
Compare the measured resistance value with the following table:
Ambient Temperature | Resistance |
|---|---|
0-10° C (32-50° F) | 2,782-1,663 ohms |
10-20° C (50-68° F) | 1,837-1,140 ohms |
20-30° C (68-86° F) | 1,260-806 ohms |
30-40° C (86-104° F) | 893-570 ohms |
40-50° C (104-122° F) | 630-428 ohms |
Is the resistance within the limits indicated?
Yes | GO to Z18 |
|---|---|
No | GO to Z17 |
Z17 CHECK THE PASSENGER SEAT CUSHION BLOWER MOTOR THERMISTOR
Disconnect: Passenger Seat Cushion Blower Motor C3040. Measure the component side resistance between:
Positive Lead | Measurement / Action | Negative Lead |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.