Is the airflow exhausting from the passenger seat cushion blower motor comparable to the airflow exhausting from the driver seat cushion blower motor?
Yes | GO to Z16 |
|---|---|
No | INSTALL a new passenger seat cushion foam pad. |
Z8 CHECK THE PASSENGER SEAT CUSHION BLOWER FOR AN OBSTRUCTION OR RESTRICTED FILTER
Ignition OFF. Inspect the blower of the passenger seat cushion blower motor assembly for an obstruction or for a restricted filter.
Is the blower obstructed or the filter restricted?
Yes | REMOVE the obstruction or INSTALL a passenger seat cushion blower motor. REFER to: Front Seat Cushion Blower Motor (501-10A Front Seats, Removal and Installation). |
|---|---|
No | GO to Z9 |
Z9 CHECK THE PASSENGER SEAT CUSHION BLOWER SPEED CONTROL CIRCUIT FOR AN OPEN
REFER to: Supplemental Restraint System (SRS) Depowering (501-20B Supplemental Restraint System, General Procedures). Disconnect: Passenger Side Airbag In-line C219. Disconnect: SCME C3265C. Disconnect: Passenger Seat Cushion Blower Motor C3040. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265C-3 | C3040-7 |
Is the resistance less than 3 ohms?
Yes | GO to Z10 |
|---|---|
No | REPAIR the circuit. GO to Z22 |
Z10 CHECK THE PASSENGER SEAT CUSHION BLOWER CIRCUIT FOR A SHORT TO VOLTAGE
Ignition ON. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265C-7 | Ground |
Is any voltage present?
Yes | REPAIR the circuit. GO to Z22 |
|---|---|
No | GO to Z11 |
Z11 CHECK THE PASSENGER SEAT CUSHION BLOWER CIRCUIT FOR A SHORT TO GROUND
Ignition OFF. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C3265C-8 | Ground |
Is the resistance greater than 10,000 ohms?
Yes | GO to Z12 |
|---|---|
No | REPAIR the circuit. GO to Z22 |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.