Locks, Latches and Entry Systems

Remove the window regulator REFER to: Front Door Window Regulator (501-11 Glass, Frames and Mechanisms, Removal and Installation). Install the exterior door handle strap back onto the exterior door handle reinforcement. Disconnect the exterior door handle actuating rod from the door latch. Pull and release the exterior door handle

Does the exterior door handle return to a closed position once released?

D2 CHECK THE EXTERIOR DOOR HANDLE AND LINKAGE OPERATION

Operate the exterior door handle while observing the linkage.

Are any of the exterior door handle components or linkages binding?

The Interior Door Release Handle Sticks

Normal Operations and Fault Conditions

The interior door handle is connected to the door latch by an actuating cable. When the interior door handle is pulled, the cable pulls on the latch lever. When the latch lever is moved, the door latch releases, allowing the door to open. The handle has a return spring to make sure the handle returns to a closed position.

Possible Cause

Binding cable Broken handle return spring Door latch

PINPOINT TEST E : THE INTERIOR DOOR RELEASE HANDLE STICKS

E1 CHECK FOR A BROKEN RETURN SPRING

Remove the interior door handle. REFER to: Interior Front Door Handle (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation). Pull and release the interior door handle.

Does the interior door handle return to a closed position once released?

E2 CHECK THE INTERIOR DOOR HANDLE CABLE OPERATION

Remove the interior door latch release cable. Observe the door latch release cable for any damage or binding.

Is the door latch release cable OK?

Squeak-Rattle-Chucking Noise From Door

Possible Cause

Door alignment Striker adjustment Door latch

PINPOINT TEST F : SQUEAK-RATTLE-CHUCKING NOISE FROM DOOR

F1 CHECK FOR ANY LOOSE COMPONENTS

Remove the door trim panel. Inspect inside the door for any loose components.