H1 CHECK FOR BCM (BODY CONTROL MODULE) , DDM (DRIVER DOOR MODULE) AND PDM (PASSENGER DOOR MODULE) DIAGNOSTIC TROUBLE CODES (DTCS)
Are any Diagnostic Trouble Codes (DTCs) present?
Yes | REFER to the BCM DTC Chart, the DDM DTC Chart or the PDM DTC Chart in this section. |
|---|---|
No | GO to H2 |
H2 VERIFY THE OPERATION OF BOTH DOOR LOCK CONTROL SWITCHES
Press the lock and unlock buttons on both door lock control switches while observing the door lock operation.
Does any door lock operate?
Yes | GO to H3 |
|---|---|
No | GO to H4 |
H3 CHECK IF THE LOCKS OPERATE IN ONLY ONE DIRECTION
Press the lock and unlock buttons from the driver door lock control switch and then the passenger door lock control switch while observing the door locks.
Are all the door locks inoperative from both switch positions (lock and unlock) of either door lock control switch?
Yes | GO to Pinpoint Test K |
|---|---|
No | GO to Pinpoint Test J |
H4 CHECK THE BCM (BODY CONTROL MODULE) DOOR LOCK GROUND CIRCUIT FOR AN OPEN
Ignition OFF. Disconnect BCM C2280C. Measure
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2280C-10 | Ground |
Is the resistance less than 3 ohms?
Yes | GO to H5 |
|---|---|
No | REPAIR the circuit. |
H5 CHECK THE ALL DOOR LOCK CIRCUIT FOR AN OPEN
Disconnect Left Front Door Latch C525. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C2280C-35 | C525-7 |
Is the resistance less than 3 ohms?
Yes | GO to H6 |
|---|---|
No | REPAIR the circuit. |
H6 CHECK FOR CORRECT BCM (BODY CONTROL MODULE) OPERATION
Disconnect and inspect all the BCM connectors. Repair:
corrosion (install new connectors or terminals - clean module pins) damaged or bent pins - install new terminals pins pushed-out pins - install new pins as necessary
Reconnect the BCM connectors and make sure they seat and latch correctly. Operate the system and determine if the concern is still present.
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.