No | REPAIR the circuit in question. |
|---|
J7 CHECK THE LOCK REQUEST INPUT CIRCUIT
Click to display connectors
Driver Door Lock Control Switch (without memory)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C505-4 | C505-3 |
Click to display connectors
Driver Door Lock Control Switch (with memory)
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C541-2 | C541-3 |
Click to display connectors
Passenger Door Lock Control Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C605-1 | C605-2 |
Remove the fused jumper wire.
Do the doors lock?
Yes | GO to J10 |
|---|---|
No | For vehicles not equipped with a memory seat, GO to J8 For vehicles equipped with a memory seat, GO to J9 |
J8 CHECK THE LOCK REQUEST INPUT CIRCUIT FOR AN OPEN (WITHOUT MEMORY SEAT)
Disconnect BCM C2280E. Measure:
Click to display connectors
Driver Door Lock Control Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C505-4 | C2280E-17 |
Click to display connectors
Passenger Door Lock Control Switch
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C605-1 | C2280E-17 |
Is the resistance less than 3 ohms?
Yes | GO to J15 |
|---|---|
No | REPAIR the circuit. |
J9 CHECK THE LOCK REQUEST INPUT CIRCUIT FOR AN OPEN (WITH MEMORY SEAT)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.