MAMUSTANG ATLASTHE ENTHUSIAST'S REFERENCE

2016 workshop · Body & Paint

Locks, Latches and Entry Systems

501-14 Handles, Locks, Latches and Entry Systems

2016 MustangReference 1,387 / 6,619HTML edition
← Chapter contentsProcedure contents

Click to display connectors

Driver Door Lock Control Switch (with memory)

Positive Lead

Measurement / Action

Negative Lead

C541-3

Ground

Click to display connectors

Passenger Door Lock Control Switch

Positive Lead

Measurement / Action

Negative Lead

C605-2

Ground

Is the resistance less than 3 ohms?

Yes

INSTALL a new door lock control switch in question. REFER to: Door Lock Control Switch (501-14 Handles, Locks, Latches and Entry Systems, Removal and Installation).

No

REPAIR the circuit.

A Door Lock Indicator Is Inoperative

Refer to Wiring Diagrams Cell 117 for schematic and connector information.

Refer to Wiring Diagrams Cell 89 for schematic and connector information.

Normal Operations and Fault Conditions

REFER to: Handles, Locks, Latches and Entry Systems - System Operation and Component Description (501-14 Handles, Locks, Latches and Entry Systems, Description and Operation).

BCM DTC Fault Trigger Conditions

DTC

Description

Fault Trigger Conditions

B1490:11

Lock Indicator LED Status Output: Circuit Short To Ground

Sets when the BCM detects a short to ground from the door lock indicator voltage supply circuit.

B1490:15 Lock Indicator LED Status Output: Circuit Short To Battery

or Open

Sets when the BCM detects an open from the door lock indicator voltage supply circuit.

Possible Cause

Wiring, terminals or connectors PDM DDM Body Control Module B (BCM-B) BCM

PINPOINT TEST L : A DOOR LOCK INDICATOR IS INOPERATIVE

L1 CHECK THE DOOR LOCK OPERATION

Ignition OFF. Check the operation of the door locks using the door lock control switches.

Do the door locks operate correctly?

L2 CHECK THE UNLOCK FEEDBACK CIRCUIT INPUT

Ignition OFF. Disconnect suspect door lock indicator harness connector. Lock the doors using a door lock control switch. Measure:

Click to display connectors

Source reference 1387

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.