Do the windshield wipers continue to operate?
Yes | GO to D4 |
|---|---|
No | INSTALL a new wiper/washer switch. REFER to: Steering Column Multifunction Switch RH (211-05 Steering Wheel and Column Electrical Components, Removal and Installation). TEST the system for normal operation. If the concern is still present, GO to D9 |
D4 CHECK THE HIGH SPEED FAIL-SAFE CIRCUIT FOR A SHORT TO GROUND
Ignition OFF. Disconnect Windshield Wiper Motor C1656. Measure:
Click to display connectors
Positive Lead | Measurement / Action | Negative Lead |
|---|---|---|
C1656-1 | Ground |
Is the resistance greater than 10,000 ohms?
Yes | GO to D8 |
|---|---|
No | REPAIR the circuit. |
D5 CHECK FOR BCM (BODY CONTROL MODULE) DTC (DIAGNOSTIC TROUBLE CODE) B130F:14
Ignition ON. Using a diagnostic scan tool, carry out the BCM self-test.
Is DTC B130F:14 present?
Yes | GO to D6 |
|---|---|
No | GO to D7 |
D6 CHECK THE WIPER RELAY CONTROL CIRCUIT FOR A SHORT TO GROUND
Ignition OFF. Disconnect BCM C2280F. Disconnect Wiper Relay. Measure:
Positive Lead | Measurement / Action | Negative Lead |
|---|
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.