DTC | Description | Action |
|---|---|---|
Top, Removal and Installation). | ||
P1240:1C Sensor Power Supply - Circuit Voltage Out of Range | GO to Pinpoint Test D | |
U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test F |
U0142:00 | Lost Communication With Body Control Module "B": No Sub Type Information | GO to Pinpoint Test G |
U020A:00 | Lost Communication With Moveable Roof Control Module "B" (MRCMB): No Sub Type Information | GO to Pinpoint Test I |
U0294:00 | Lost Communication With Powertrain Control Monitor Module: No Sub Type Information | GO to Pinpoint Test H |
U2011:64 | Motor: Signal Plausibility Failure | Using a diagnostic scan tool, CLEAR the DTC. SET the ignition to ON. Using the convertible top switch, OPEN or CLOSE the convertible top. If the convertible top does not operate, INSTALL a new Moveable Roof Control Module A (MRCMA). REFER to: Convertible Top Motor (501-18 Convertible Top, Removal and Installation). |
U2011:98 | Motor: Component or System Over Temperature | WAIT a minimum of 2 minutes to allow the motor time to cool. Using a diagnostic scan tool, CLEAR the DTC. SET the ignition to ON. Using the convertible top switch, OPEN or CLOSE the convertible top. If the convertible top does not operate, CARRY OUT the Moveable Roof Control Module A (MRCMA) self-test. If the DTC does not return, DIAGNOSE any other Moveable Roof Control Module A (MRCMA) Diagnostic Trouble Codes (DTCs), verify all convertible roof operation entry conditions have been met. REFER to: Convertible Top - Overview (501-18 Convertible Top, Description and Operation). If the DTC returns, the system has not had sufficient time to cool. SET the ignition to OFF and WAIT another 2 minutes, CLEAR the DTC and REPEAT the self-test. |
U2013:64 | Switch Pack: Signal Plausibility Failure | GO to Pinpoint Test E |
U3000:49 | Control Module: Internal Electronic Failure | Using a diagnostic scan tool, CLEAR the DTC. SET the ignition to ON. Using the convertible top switch, OPEN or CLOSE the convertible top. Using a diagnostic scan tool, CARRY OUT the Moveable Roof Control Module A (MRCMA) self-test. If the DTC returns, INSTALL a new Moveable Roof Control Module A (MRCMA). REFER to: Convertible Top Motor (501-18 Convertible Top, Removal and Installation). |
Diagnostic Trouble Code (DTC) Chart: Moveable Roof Control Module B (MRCMB)
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.