Moveable Roof Control Module B (MRCMB) DTC Chart
DTC | Description | Action |
|---|---|---|
B1070:12 | Tonneau Lid Piston Out Sensor: Circuit Short to Battery | GO to Pinpoint Test B |
B1070:14 | Tonneau Lid Piston Out Sensor: Circuit Short to Ground or Open | GO to Pinpoint Test B |
B1070:29 | Tonneau Lid Piston Out Sensor: Signal Invalid | GO to Pinpoint Test B |
B1268:24 | Convertible / Folding Top Activation Down Switch: Signal Stuck High | GO to Pinpoint Test E |
P0604:44 | Internal Control Module Random Access Memory (RAM) Error: Data Memory Failure | Using a diagnostic scan tool, CLEAR the DTC. CYCLE the ignition from ON to OFF and back to ON. CARRY OUT the Moveable Roof Control Module B (MRCMB) self-test. If the DTC returns, INSTALL a new Moveable Roof Control Module B (MRCMB). REFER to: Convertible Top Motor (501-18 Convertible Top, Removal and Installation). |
P0605:45 | Internal Control Module Read Only Memory (ROM) Error: Program Memory Failure | Using a diagnostic scan tool, CLEAR the DTC. CYCLE the ignition from ON to OFF and back to ON. CARRY OUT the Moveable Roof Control Module B (MRCMB) self-test. If the DTC returns, INSTALL a new Moveable Roof Control Module B (MRCMB). REFER to: Convertible Top Motor (501-18 Convertible Top, Removal and Installation). |
P062F:46 Internal Control Module EEPROM Error: Calibration / Parameter Memory Failure | Using a diagnostic scan tool, CLEAR the DTC. SET the ignition to OFF and wait 20 seconds. SET the ignition to ON. CARRY OUT the Moveable Roof Control Module B (MRCMB) self-test. If the DTC returns, INSTALL a new Moveable Roof Control Module B (MRCMB). REFER to: Convertible Top Motor (501-18 Convertible Top, Removal and Installation). | |
U0140:00 | Lost Communication With Body Control Module: No Sub Type Information | GO to Pinpoint Test F |
U0207:00 | Lost Communication With Moveable Roof Control Module "A" (MRCMA): No Sub Type Information | GO to Pinpoint Test J |
U2011:64 | Motor: Signal Plausibility Failure | Using a diagnostic scan tool, CLEAR the DTC. SET the ignition to ON. Using the convertible top switch, OPEN or CLOSE the convertible top. If the convertible top does not operate, INSTALL a new Moveable Roof Control Module B (MRCMB). REFER to: Convertible Top Motor (501-18 Convertible Top, Removal and Installation). |
2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.