Camshaft RH — 2016 workshop reference 158

Camshaft RH — original illustration 1, reference 158Original colors & callouts · Select to enlarge

4. Remove the bolts and the camshaft bearing caps.

Camshaft RH — original illustration 2, reference 158Original colors & callouts · Select to enlarge

5. Remove the intake and exhaust camshafts.

Camshaft RH — original illustration 3, reference 158Original colors & callouts · Select to enlarge

Step 6

1. Remove the camshaft roller follower and hydraulic lash adjuster assemblies.

2. Separate the hydraulic lash adjusters from the spring clips on the camshaft roller followers.

3. Inspect the hydraulic lash adjuster and roller follower for damage. If any damage is found, inspect the camshaft lobes and valves for damage. Replace damaged components as necessary.

Source reference 158

2016 Mustang workshop publication supplied to Mustang Atlas. Original technical text and illustrations; HTML formatting by Mustang Atlas. Source page numbering is retained for traceability. Follow the configuration, revision, warnings, and cross-references in the material. About this edition.